When they tried to access the garage door, a client in Ralston, NE, noticed the chain was sagging and that the door was not opening though the motor was running. They immediately called Titan Garage Doors NE for assistance. Our team arrived at the location within an hour and quickly discovered that the culprit was a worn-out opener's gear. We replaced the gear and sprocket assembly and lubricated them with silicone spray before putting the machine back in position. After running some tests, we were confident that the garage door opener repair was successful! The garage door opener was working again — much to the relief of our clients, who had assumed they would need to purchase an entirely new unit.

Gears can become damaged over time due to wear and tear, so it is important to inspect them regularly. For example, once you notice a slack on your chain, a motor that runs but the door does not move or open and stops in the incorrect position, it may be time to change the gears. Replacing the gears as soon as possible is best to avoid further damage and costly repairs.

Sooner or later, you will wonder why your garage door is so difficult to open. It can be a major inconvenience, especially in a hurry. Additionally, it can also compromise the security of your home. After all, a firmly locked door is one of the best ways to deter intruders.

Symptoms of a Faulty Garage Door Opener

Garage door openers are a common problem for homeowners. So, how can you identify when your garage door opener will fail? Here are some symptoms of a faulty garage door opener and some simple fixes.

The Garage Door Does Not Open in the Winter

As temperatures drop, your garage door may become less responsive. Also, the rollers can stiffen in colder weather, making it difficult for the door to lower. However, adjusting the opener's sensitivity can fix the problem. Check the owner's manual for details on how to do this.

The Garage Door Does Not Close Fully

A garage door that opens properly but does not completely close has five typical causes, one of which is:

  • Different garage door openers have different ways of ensuring people's safety. One such way is through a close-limit switch. This switch is designed to prevent injuries by keeping doors from closing on people. It can be adjusted to account for different door sizes and weights. In some instances, it may need to be readjusted over time. Set-limit switches serve a similar purpose, but for when a door is opening. They tell motors when to stop working so that doors do not open too far and fall off their hinges.
  • It is important to ensure that your safety sensors are properly aligned and adjusted. It is because electronic eyes are located near the bottom of door tracks on both sides, and they need to have a clear line of sight between them to work properly.
  • Garage doors have different ways of adjusting the close-limit switch. However, the most common method is to turn a screw on the motor unit to regulate how far the door falls. Incorrectly setting the close-limit switch can prevent the door from closing. Sometimes, the opener will either reverse or pull back up when you try to close it.
  • Doors are designed to open and close smoothly, but sometimes something can get in the way and cause them to malfunction. In most cases, doors will stop or reverse when they encounter an obstruction, and lights will flash to indicate a problem. To avoid this, ensure nothing is blocking the electronic sensors' sightline. Sometimes leaves or debris can obstruct the sensors; it may become a problem if this occurs frequently.
  • Check the rollers are in good condition to prevent your door from sticking in its tracks. You can either replace damaged rollers or lubricate them with silicone lubricant. Another possibility is that the tracks have shifted or bent, which would cause the door to bind.
  • Final Thoughts

    It is important to remember that garage doors are complex machinery and should always be repaired by a professional. Attempting to fix a garage door can often lead to further damage and expensive repairs. However, knowing the parts of a garage door and any potential issues will help you communicate better with the repair company.

    Have you ever walked through the garage and seen changes or heard a few unusual sounds? Then, there must be something wrong with your garage door opener. And, when it happens, take a deep breath and do not panic. Titan Garage Doors NE is the best place for garage door opener repair. We have trained experts who can fix or replace your garage door opener quickly and efficiently. In addition, we are an authorized dealer of top brands like LiftMaster, Genie, and Chamberlain. Plus, all of our work is guaranteed with a warranty on labor and parts. 

    Titan Garage Doors NE is a reputable company that offers residential and commercial garage doors—we handle installation, maintenance, and all garage door repairs. Call us today for your free estimate at (402) 513-0255.