Titan Garage Doors NE recently received a call from a Council Bluffs, IA, homeowner who needed an urgent garage door repair. Their garage door had been acting up lately, making them worry about the safety of their home and family.

When we came to the scene, it did not take our technician long to figure out what was wrong. The Genie garage door safety sensors had accumulated dirt and dust around the lenses, so they worked unreliably. Our repair expert cleaned the sensors with precision and care, leaving no dirt behind. We also checked the alignment and adjusted them to the right positions. This simple solution fixed the problem and made the garage door system run smoothly again. Our quick response and effective fix made the client happy that their home was secure again.

A garage door safety sensor, also known as a photo-eye or an infrared beam sensor, ensures that garage doors work safely. You usually place these sensors near each side of the bottom of the garage door tracks. They send an infrared beam across the width of the door. If the garage door sensors sense an obstruction in its path, the door will not close or reverse its motion. 

Why Having a Garage Door Safety Sensor Is a Good Idea?

So, here are a few reasons to have a garage door safety sensor.

Protection Against Entrapment 

The main purpose of these sensors is to keep the garage door from closing on something or someone. They could be your pets, items, or people, which could cause harm or damage.

Peace of Mind

Knowing that the garage door will stop if something or someone is in its way can give homeowners peace of mind. It is especially true if they have children or pets that could walk into the path of a closing door.

Mandatory Safety Feature 

Safety sensors are required in many places for garage door openers. It makes sure that the openers meet local laws and standards.

How Do You Know If You Have Broken Garage Door Sensors?

If your garage door sensors are not working, here is a condensed guide to diagnose the issue:

1. Garage door reversal: The sensors may detect a nonexistent obstruction if the door does not close or reverses immediately.2.

2. Indicator lights: Sensors typically have lights. If one is off or blinking, there is likely an issue.

3. Manual test: Block the sensors and try closing the door. If it closes, they are malfunctioning. If it stops/reverses, they are likely fine.

4. Inspect for damage: Check for visible wear, cracks, or loose wires. Ensure they are securely attached.

5. Clean Lenses: Dirt can hinder function. Clean them gently.

7. Alignment: Sensors must face each other. Misalignment might turn off or blink their lights.

8. Check Wires: Examine for any fraying or disconnections.

9. Manual Door Operation: Disconnect the opener using the emergency cord. If the door moves smoothly manually, the problem might be the sensors or opener.

10. Battery Check (if wireless): Replace if they are dead.

If troubleshooting does not resolve the issue, consider replacing the sensors or consulting a garage door technician. Always ensure safety when working on or near the door.’

Looking for a foolproof way to secure your home? Use reliable garage door safety sensors to make sure your home is safe. Titan Garage Doors NE is your trusted partner for top-notch garage door service and repairs. Our skilled techs will not only figure out what is wrong and fix it, but they will also upgrade your sensors to the newest, most advanced technology. That will give you peace of mind and the highest level of security. Why gamble with your home’s security? Trust Titan Garage Doors NE experts for reliable, quick, affordable garage door repair and maintenance services. Call us today and get a free quote.